Baofeng UV-5R Dual Band Walkie Talkie 1800mAh Li-ion Battery

Baofeng UV-5R Two Way Radio Dual Band 144-148/420-450Mhz Walkie Talkie 1800mAh Li-ion Battery

Radio Frequency IC:

Upgraded SQ to enhance the anti-interference ability
RDA1846S adds an new tail tone elimination function, when transmitting and receiving signal between 50Hz with 55Hz
Improves the receiver AGV switching noise when signal strength changes severe

Frequency-Modulated Receiver Chip:

The RDA5802N has a powerful low-IF digital audio processor, which makes it have the most optimum sound quality with varying reception conditions

Power Amplifier IC :

Low crossover distortion
Low quiescent circuit current
N5R Firmware
Hold ‘0’ – Display Voltage
Removes Cloning Capabilities (Due to Several Firmware Edits)
VERSATILE RADIO FOR AMATEUR USE
The Baofeng UV-5R is legal for use on amateur frequencies. The UV-5R is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).

Dual Watch Receiver

The Baofeng UV-5R has one built-in receiver but can “watch” two channels (semi duplex). Monitor two different frequencies (even on different bands (VHF/UHF)) and the radio will monitor both frequencies giving priority to the first station to receive an incoming call.

FM Broadcast Station

You can listen to the FM Broadcast radio, while still monitoring your radio frequencies in the background. Any incoming call will be given priority insuring you never miss an important call while listening to the radio.

Group Tones supported

The Baofeng UV-5R supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the UV-5R supports the latest standards

The Baofeng UV-5R can even send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones

Customize Your Operation with channels, Programmable Buttons, and more!

You can program your Baofeng UV-5R exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program from a PC to set-up the radio to operate exactly as needed.